• Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
  • Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
  • Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
  • Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
  • Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor

Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor

Application: Industrial
Speed: Low Speed
Number of Stator: Three-Phase
Function: Driving
Casing Protection: Closed Type
Number of Poles: 6,8,10
Customization:

Contact Supplier

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation

Basic Info.

Model NO.
YZR2-62-10-45KW-380V
Starting Mode
Direct on-line Starting
Certification
ISO9001, CCC, Ce
Brand
Julun
Voltage
380V/400V/415V/420V/440V/660V/690V
Installation
B3/B35/B5/V1
Protection
IP44 or IP54,IP55
Motor Type
Crane Slip Ring Motor
Rotor Type
Wound Rotor Motor
Transport Package
Plywood Case
Trademark
ZCL
Origin
Shijiazhuang, China
HS Code
8501530090
Production Capacity
200 Sets Per Month

Product Description

Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
 YZR JZR JZR2 YZRE YZRW YZRD series Metallurgical and crane wound rotor slip ring electric ac motor
I. Product Description
YZR YZ Series electric ac motor for crane and metallurgical uses, featured with large overload capacity
and adequate mechanical strength, is specially suitable for driving various types of crane and metallurgical machine or other similar equipment.
YZR series electric ac motor is of wound rotor slip ring type, while YZ series electric ac motor is of squirrel cage type.
II.  Tec specification
1. Duty type: S2,S3,S4,S5,S6,S7,S8 and S9. The basic duty type is S340% (duty type is S3, cyclic duration factor is 40%, each cyclic is 10min). The following duty types are most useful to these series motors.
2. Cooling method: IC411, IC410
3. Protection rating: IP55, IP54, IP44
4. Mounting: B3, B5
5. Insulation class: F,H
6. Ambient temperature: -10oC~+60oC, Max. Altitude: 1000m
7. Rated frequency: 50hz
8. Rated voltage: 380V
9. Connection: The stator winding is connected in Y for 132kW and below and in for the rest. In Y with zero lead is also supplied.
1.1 YZR, YZ series of motor lines used to drive various types of lifting machinery and other similar equipment, special products; has a large overload capacity and high mechanical strength, so it is particularly suitable for those short or intermittent Periodic work system, frequent start, brake, sometimes overload and significant vibration and shock equipment.
1.2 Motor power rating and installation size in line with IEC72 recommended standards, power level and installation size of the corresponding relationship with the Japanese JEM1202 and West Germany DIN42681 similar and interchangeable.
1.3 The insulation class of the motor is divided into F and H. Class F is suitable for general conditions where the cooling medium temperature does not exceed 40 ° C. Class H is applicable to metallurgical sites where the cooling medium temperature does not exceed 60 ° C. Both motors have the same electrical performance.
1.4 motor has a good seal, for the general place of the motor protection class IP44, for the metallurgical area of the motor housing protection class IP54.
 
Mounting  
arrangement  
Frame size  
IM1   IM3  
   
Drive end
   
Non-diver end
 
Drive end
 
Non-diver end

 
112   6308   6308   6308   6308  
132   6309   6309   6309   6309  
160   6311   6311   6311   6311  
180   6313   6313   6313   6313  
200   NU315   6315   NU315   7315ACJ  
225   NU315   6315   NU315   7315ACJ  
250   NU315   6316   NU316   7316ACJ  
280   NU320   6320   NU320   7320ACJ  
315   NU322   6322   NU322   7322ACJ  
355   NU326   6326        
400   6330   NU330        
Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
YZR winding slip ring motor is suitable for lifting metallurgical related mechanical equipment. The motor has high overload capacity and mechanical strength. It is suitable for short-term or intermittent periodic working system, frequent starting, braking, and significant vibration. With impact equipment.
This type of motor casing has a high strength cast iron casing, the motor junction box is located at the top of the motor, the motor fan is a good performance cast aluminum fan, and the motor slip ring uses a high quality copper slip ring.
Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
There are many types of motor products manufactured and sold by our company. The main products are high- and low-voltage three-phase asynchronous motors. The motor structure types include squirrel-cage type and winding type. Among them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of "focus on products, service with heart" and provide high-quality motor products to customers.
Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor
The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.
Metallurgical and Overhead Crane Winding Rotor Slip Ring Motor



 

Send your message to this supplier

*From:
*To:
avatar Mr. Tian
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation
Registered Capital
10000000 RMB
Plant Area
>2000 square meters