• Yrkk High Voltage Slip Ring Motor
  • Yrkk High Voltage Slip Ring Motor
  • Yrkk High Voltage Slip Ring Motor
  • Yrkk High Voltage Slip Ring Motor
  • Yrkk High Voltage Slip Ring Motor
  • Yrkk High Voltage Slip Ring Motor

Yrkk High Voltage Slip Ring Motor

Application: Industrial
Operating Speed: Constant Speed
Number of Stator: Three-Phase
Species: Yr Wound Rotor Slip Ring Motor
Rotor Structure: Winding Type
Casing Protection: Protection Type
Customization:

Contact Supplier

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation

Basic Info.

Model NO.
YRKK4001-6-185KW
Number of Poles
6
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv.3.3kv.6kv.6.6kv.10kv.11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
185kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Transport Package
Plywood Case
Trademark
ZCL
Origin
Shijiazhuang, China
HS Code
8501530090
Production Capacity
500 Sets Per Month

Product Description

Yrkk High Voltage Slip Ring Motor
Our products strictly enforce the IEC motor production standards, and after ISO9001 quality management system of strict quality control, to ensure that my company's high-quality products. My company's products in many areas have been the majority of customers praise.
Here we briefly introduce my company's products.

Motor frame
Motor frame: the use of domestic high-quality 45 # steel plate welded processing, with surface processing size tolerance should be less than 0.01mm, to ensure that the mechanical properties of the motor.

Motor spindle
Spindle material forged 45A steel. After quenched and tempered after rough car, fine car, washing, grinding and other processes from processing, to ensure the overall mechanical properties of the spindle and precision tolerance size.

Stator rotor core
(1) fixed rotor core is the use of low loss, high permeability, high stacking coefficient, the surface of the insulating film adhesion and good weldability, no time, the thickness of 0.5mm electrician high-quality grain non-oriented cold rolling Silicon steel sheet laminated. Cold rolled silicon steel sheet performance indicators should not be less than GB2521-88 requirements, the material used by the performance of not less than 50W310. Each piece of silicon steel sheet should be no burr, both sides coated with F-class insulation material paint to reduce the eddy current loss.
(2) fixed rotor core ventilation groove layout so that the air flow smooth and smooth, so that the stator core is fully cooled, the wind resistance loss is small.
 
Stator winding coil
Stator winding coil using domestic high-quality manufacturers to provide the F-class insulation grade enameled wire or double glass fiber flat copper wire wound around. In the manufacturing process after several inter-turn pulse voltage test and ground pressure test.

The stator rotor winding is embedded in the core  
The stator rotor winding: 100% pure copper flat copper bending, F-class insulation mica wrapped.

Stator rotor winding wiring
In the manufacturing process with silver copper argon arc welding, and with F-class insulation mica will be welded at the package so the motor insulation performance is excellent and reliable, good mechanical strength, moisture resistance.
 
Stator winding rotor winding vacuum impregnation
Using foreign advanced vacuum pressure impregnation solvent-free paint equipment and process (VPI) treatment. Has a good anti-corona and anti-corrosion resistance, in the groove, the end of the site to take anti-halo measures.
Therefore, the motor insulation performance is excellent and reliable, good mechanical strength, moisture resistance.

Rotor fine processing and dynamic balance check
Rotor fine processing to ensure the stability of the stator and rotor between the uniform
Dynamic balancing checks ensure good mechanical performance of the motor. 
 
Machine assembly and experiment
experimental projects
Mechanical inspection/Determination of DC resistanceDetermination of insulation resistanceNo load testDetermination of vibration and temperature riseDetermination of open circuit voltage of rotorStall testWinding to ground pressureTurnstrap test30KV DC leakage test (only 10KV motor)
  Yrkk High Voltage Slip Ring Motor
Center height range: H355 ~ 800mm
Power range: 185kW ~ 5000kW
Number of poles: 2/4/6/8/10/12/16
Rated voltage: 3000V/3300V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Yrkk High Voltage Slip Ring Motor
The high-voltage slip ring motor adopts a box structure, and the frame is welded by steel plate, which is light in weight and good in rigidity.
The high voltage slip ring motor is a closed-structure motor with an air-to-air cooler at the top. The stator winding adopts Class F heat-resistant insulating material, and the top binding is reliable, and the vacuum pressure immersion paint makes the motor have good insulation performance and mechanical strength.
The rotor of the high voltage slip ring motor uses a winding structure of a copper conductor. Bearings are available in both rolling and plain bearings, depending on the speed and power of the motor.
Yrkk High Voltage Slip Ring Motor
Yrkk High Voltage Slip Ring Motor
The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.
Yrkk High Voltage Slip Ring Motor
Yrkk High Voltage Slip Ring Motor
The company insists on providing high-quality motor products and services to users, and has won high praise from many domestic and foreign customers. The company will receive many foreign merchants to visit our factory every year, and establish a good cooperative relationship through on-site inspection of our factory. Our company always welcomes customers to visit our factory.

Yrkk High Voltage Slip Ring Motor
Main process flow of the motor
Motor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storage
Yrkk High Voltage Slip Ring Motor
Yrkk High Voltage Slip Ring Motor
Why choose us (our service advantage)
1. Professional motor manufacturing service provider;
2. Sound product quality management and certification system;
3. Have a professional sales and technical service team;
4. The motor has perfect process and strong mechanical processing capability;
5. High standard product technical service system;
6, good faith and mutual benefit, good credit guarantee.





 

Send your message to this supplier

*From:
*To:
avatar Mr. Tian
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation
Registered Capital
10000000 RMB
Plant Area
>2000 square meters