Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Transport Package
Plywood Case
Trademark
ZCL
Origin
Shijiazhuang, China
HS Code
8501530090
Production Capacity
300 Sets Per Month
Product Description
The Wound Rotor Motor is a High Voltage slip ring motor developed and manufactured by our company for many years. This type of motor adopts box structure. The frame is made of steel plate welded box structure, which is light in weight and good in rigidity. There are windows on both sides and top of the frame. Holes, can be installed with a protective cover or cover, after removing the protective cover or cover, you can observe and touch the inside of the motor to facilitate the maintenance and repair of the motor.
The rotor of the wound rotor motor adopts a sliding-in external press-fit structure. The stator winding is made of Class F insulation material, and the ends are reliably fixed and bundled. During the manufacturing process, multiple turns of the pulse voltage test and the ground pressure test are carried out. And vacuum pressure impregnation solventless paint process (VPI) treatment, therefore, the motor's insulation performance is excellent and reliable, mechanical strength is good, moisture resistance is strong. The wound rotor is treated with Class F insulation and vacuum pressure impregnation solventless paint process (VPI). The rotor weld head and the wiring are all insulated. The bearing has two types of rolling bearing and sliding bearing. According to the motor power and speed, the basic form of protection is IP54. If the motor has a high degree of protection, the protection level of the bearing will also increase.
The main outlet box of the wound rotor motor is IP54 protection grade. It is usually installed on the right side of the motor (facing the motor shaft extension). It can also be installed on the left side of the motor according to the order. There is a separate grounding inside the main outlet box. Terminal. Center height range: H355 ~ 1000mm Power range: 220kW ~ 10000kW Number of poles: 2/4/6/8/10/12 Rated voltage: 3000V/6000V/6600V/10000V/11000V Rated frequency: 50HZ/60HZ Protection level: IP54 or IP55 Insulation class: F Work system: S1 (continuous) Cooling method: IC611/IC616 Installation form: IMB3 Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base) Altitude: no more than 1000m This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor). The wound rotor motor is a slip-surrounding three-phase asynchronous motor, which can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance. 1. The outer packaging of the products are all standard export-oriented wooden plywood packaging. 2, the product packaging is protected by moisture, water plastic soft packaging 3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package. 4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
Our company's motor manufacturing factory adheres to the concept of green, efficient and energy-saving production service, pays attention to the harmonious development of internal and external environment, builds environmentally friendly motor manufacturing enterprises, strictly implements motor standard process, and selects high-quality energy-saving materials to ensure the quality of motor products.
1. Professional motor manufacturing service provider; 2. Sound product quality management and certification system; 3. Have a professional sales and technical service team; 4. The motor has perfect process and strong mechanical processing capability; 5. High standard product technical service system; 6, good faith and mutual benefit, good credit guarantee.
Audited Supplier 
){kind=link}