Y series (6.6KV) high-voltage squirrel cage motor allows direct start at full pressure. If the load torque is not large, the step-down starting method can also be adopted. The starting torque of the motor during the step-down starting is roughly proportional to the square of the voltage, if the load When the mechanical moment of inertia is within a certain range, the motor is allowed to be continuously started twice in a cold state, and the hot state is continuously started once. The Y series (6.6KV) high voltage asynchronous motor has a rated frequency of 50Hz and a rated voltage of 6KV and 10KV. Its characteristics are as follows: 1. Fully compliant with IEC standards. 2. The motor efficiency is increased by 2% on average compared with the old products. 3, the use of box-shaped structure, easy to transport, installation, maintenance, and maintenance. Save users' civil construction investment fees. The ventilation protection type of the motor can also be flexibly changed according to the needs of the user. 4. The stator winding adopts "F" class solvent-free immersion insulation series. 5. The motor adopts end-cap sliding bearing, which adopts "air seal" and floating labyrinth device structure to prevent oil leakage. 6, the motor uses cast aluminum or copper row rotor, reliable operation. Ventilation and protection type: The motor ventilation adopts radial self-ventilation mode. The cooling air enters from the upper cover of the motor along the axial side, and is discharged through the inside of the motor and then from both sides of the upper cover hole. The basic protection type of Y series (6.6KV) high-voltage AC motor is IP23, and it can also be replaced with top windshield-derived pipe ventilation type IP44. 4-12 pole motor can also be derived as air-to-air cooler with closed circulation ventilation type IP44 and climate protection type. IPW24. Center high range: H355-H800 Power range: 220KW-7100KW Voltage: 3KV//3.3KV/6KV/6.6KV Number of poles: 2/4/6/8/10/12 Rated frequency: 50HZ/60HZ Protection level: IP23 Cooling method: IC01 Insulation class: Class F Working system: S1 Wiring method: Y This type of motor is suitable for use in environments where the ambient temperature is -15~+40 degrees Celsius, the altitude is not more than 1000m, indoor or outdoor, and no hazardous gas environment. Y series (6KV) high-voltage three-phase asynchronous motor can be used to replace the original J/JS series motor, and realize the production of small frame size under the equal motor power. At the same time, this series of motors is widely used and versatile, and can be used to derive various types of motors. The motor has the characteristics of good heat dissipation, compact structure, light weight, good port, high efficiency, simple installation and convenient maintenance. It is the motor that is currently purchased by enterprises in various working conditions. 1. The outer packaging of the products are all standard export-oriented wooden plywood packaging. 2, the product packaging is protected by moisture, water plastic soft packaging 3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package. 4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
The motor products manufactured and sold by our company are used in many industries, such as electric power, mining, steel metallurgy, petrochemical, water conservancy, transportation, building materials and many other industries. The equipment for the motor is pump, machine tool, fan, mill, crusher, rolling mill, compressor and many other industrial equipment. ZCL Electric Motor Technology Co., Ltd. is a company mainly engaged in the manufacture, research and development and sales of motor products. The company has many types of motor products, including IEC standard motors. It is a professional IEC motor manufacturer. Related motor products have passed the product certification in China, the United States, Canada, Europe, the Middle East and other regions, and the products are exported to all over the world. Companies adhere to the "focus on products, service" business philosophy, is committed to improving the quality of safe motor products and services for customers around the world.
){kind=link}